Free Online HP HPE6-A47 Practice Test

Prepare Your HP HPE6-A47 Exam Questions with Free online HPE6-A47 Practice Test. Get Brilliant Designing Aruba Solutions Exam Results with Valid HPE6 A47 Exam Dumps.

Page: 1 / 13

Total 65 Questions | Updated On: May 16, 2024

Add To Cart

Question 1

An architect proposes Aruba 2930F switches, which do not have OOBM ports. The customer wants to follow best practices for network management security. Which guideline can the architect follow?

A : Assign access layer switches IP addresses on a VLAN that is dedicated for switch management.

B : Ensure that DHCP is enabled on only the switch Default VLAN.

C : Ensure that Telnet is enabled and set to listen on production VLANs.

D : Assign switches static IP addresses on the same VLAN on which APs are deployed.

Answer: C

Question 2

Read this scenario thoroughly, and then answer each question that displays on the right side of the screen.

An architect proposes these products for a customer who wants a wireless and wired upgrade:

Aruba 2930M switches at the access layer

Aruba 5406R switches at the core

Aruba AP-325s

Aruba 7205 Mobility Controllers (MCs), deployed in a cluster

Aruba Mobility Master (MM)

Aruba ClearPass Cx000V

Aruba AirWare

The architect also needs to propose a security plan for the solution. The customer has 900 employees and up to

30 guests a day. The customer wants to protect the internal perimeter of the network with authentication and

simple access controls. The customer is most concerned about wireless security, but also wants to ensure that

only trusted users connect on the wire. However, the customer also wants all wired traffic to be forwarded

locally on access layer switches. The customer already has a third-party firewall that protects the data center.

The customer wants to use certificates to authenticate user devices, but is concerned about the complexity of

deploying the solution. The architect should recommend a way to simplify. For the most part users connect

company-issued laptops to the network. However, users can bring their own devices and connect them to the

network. The customer does not know how many devices each user will connect, but expects about two or

three per-user. DHCP logs indicate that the network supports a maximum of 2800 devices.

Refer to the provided scenario. Which ClearPass licenses should the architect include in the proposal?

A : 1,000 Access licenses and 1000 Onboard licenses

B : 1,000 Access licenses and 3,000 (3x1000) Onboard licenses

C : 3,000 Access licenses (3x1000) and 1000 Onboard licenses

D : 3,000 Access licenses and 3,000 (3x1000) Onboard licenses

Answer: B

Question 3

Refer to the exhibit.

A customer wants to replace the core and aggregation layer of an existing network. Currently the network routes between the aggregation layer and core, and uses the technologies shown in the exhibit.

The customer now wants to route at the core, instead of the aggregation layer, and extend some of the same VLANs in different buildings. However, the customer cannot eliminate the aggregation layer at this point. What should the architect recommend?

A : Create a backplane stack at the aggregation layer and a VSF fabric at the core.

B : Implement broadcast filtering on switch-to-switch links across all of the buildings.

C : Combine all switches in the aggregation layer and core into a single backplane stack.

D : Use VRRP on the core and aggregation switches, with the aggregation switches acting as standby.

Answer: C

Question 4

An Aruba wireless solution for a very high density (VHD) wireless solution consists of a Mobility Master (MM) and two Mobility Controllers (MCs). What is the best practice design for routing the wireless traffic?

A : The MCs provide the default gateway services for wireless devices and use static routers.

B : The MCs act at Layer2, and the MM acts as the default gateway.

C : The MCs act at Layer2, and core routing switches act as the default gateway.

D : The MCs provide the default gateway services for wireless devices and use OSPF.

Answer: B

Question 5

An architect plans to deploy a Mobility Controller (MC) at one building in subnet 10.23.01.0/24 and another MC in another building in subnet 10.44.12.0/24. The MCs need to provide redundancy for each other. What must the architect take into account in the redundancy plan?

A : The MCs cannot provide any level of redundancy for each other unless one is moved into the other’s subnet.

B : The MCs cannot be in a cluster, and they must use Virtual Router Redundancy Protocol (VRRP) to provide redundancy for each other

C : The MCs can be in a cluster, but the cluster will not support features such as stateful failover.

D : Each MC can be the backup LMS for the other MCs’ APs, but it cannot be in a cluster with the other MC.

Answer: B

Page: 1 / 13

Total 65 Questions | Updated On: May 16, 2024

Add To Cart