Free Cohesity COH150 Exam Questions

Question 1

A BIG-IP Administrator needs to verify the state of equipment in the data center.A BIG-IP appliance has a solid yellow indicator on the status LED. How should the administrator interpret this LED indicator?

A : Appliance is halted or in End-User Diagnostic (EUD) mode

B : Appliance is a standby member in a device group

C : A warning-level alarm condition is present

D : A power supply is NOT operating properly

Answer: C

Question 2

The Configuration Utility of a BIG-IP device is currently accessible via its management IP 10.53.1.245 from all VLANs. The BIG-IP Administrator needs to restrict access so only hosts from the 10.0.0.0 subnet can access the Configuration Utility. Which TMSH command accomplishes this?

A : (tmos)# create /net acl MGMT.HTTP rule add { (permit tcp 10.0.0.0 0.0.0.255 host 10.53.1.245 http) }

B : (tmos)# modify /ltm httpd allow replace-all-with {10.0.0.0}

C : (tmos)# create /net acl MGMT.HTTP rule add { (permit tcp 10.0.0.0 10.53.1.245 http) (deny ip any any http) }

D : (tmos)# modify /sys httpd allow replace-all-with {10.0.0.0}

Answer: D

Question 3

The Configuration Utility of a BIG-IP device is currently accessible via its management IP 10.53.1.245 from all VLANs. The BIG-IP Administrator needs to restrict access so only hosts from the 10.0.0.0 subnet can access the Configuration Utility. Which TMSH command accomplishes this?

A : (tmos)# create /net acl MGMT.HTTP rule add { (permit tcp 10.0.0.0 0.0.0.255 host 10.53.1.245 http) }

B : (tmos)# modify /ltm httpd allow replace-all-with {10.0.0.0}

C : (tmos)# create /net acl MGMT.HTTP rule add { (permit tcp 10.0.0.0 10.53.1.245 http) (deny ip any any http) }

D : (tmos)# modify /sys httpd allow replace-all-with {10.0.0.0}

Answer: D

Question 4

When logged into the bash shell of a BIG-IP system, which of the following commands will display the management-ip address? (Choose two.)

A : tmsh list /sys management-ip

B : show mgmt ip

C : ifconfig mgmt

D : list / sys management-ip

Answer: A,C

Question 5

The Configuration Utility of a BIG-IP device is currently accessible via its management IP 10.53.1.245 from all VLANs. The BIG-IP Administrator needs to restrict access so only hosts from the 10.0.0.0 subnet can access the Configuration Utility. Which TMSH command accomplishes this?

A : (tmos)# create /net acl MGMT.HTTP rule add { (permit tcp 10.0.0.0 0.0.0.255 host 10.53.1.245 http) }

B : (tmos)# modify /ltm httpd allow replace-all-with {10.0.0.0}

C : (tmos)# create /net acl MGMT.HTTP rule add { (permit tcp 10.0.0.0 10.53.1.245 http) (deny ip any any http) }

D : (tmos)# modify /sys httpd allow replace-all-with {10.0.0.0}

Answer: D